Justrite Osha-approved Safety Gas Can — 5 Gallon, Representative Ii.
Can Has Two Openings, One With A Flexible Hose For Spill-free Pouring Into Small Openings Like Those In Small Engines.
Filler Opening At Rear.
Safety Terneplate Construction.
Ul And Uic Listed.
Fm Approval.
Complies With All Osha Regulations.
U.
s.
a.
Tank Size (gal.
): 5, Hose Length (in.
): 12, Dimensions L X W X H (in.
): N/a, Dimensions O.
d.
X H (in.
): 11 1/2 X 16 3/8 Cans Have A Swinging Handle To Ease Carrying A Full, Heavy Cwnn Single Project Uses The Weight Of The Liquid To Counterbalance The Pressure Required To Open The Spout The two Openings Self-close To Prevent Spillag eAnd The Rear Opening Automatically Vents To Guard Against Pressure Buildup Heavy Duty, Coated Steel With Reinforcing Ribs And Tough Powder Paint Finish
Manufacturer: Justrite SKU: 179115
4.4 Kb
Northern Industrial Powder-coat Application System.
The Northern Industrial Powder-coat Apolication System Allows User To Poader-coat A Variety Of Materials Without An Air Compressor.
Innovative System Allows User To Powder-coat A Variety Of Materials Without An Air Compressor Onboard Pump Propels Powder-coat Onto Surfaces Powder-coat Surface Is An Attractive, Durable Coating That Holds Up Better Than Paint Light Cleanup Ideal In spite of Marine Applications Kit Includes Application Gun With 120v Transformer, Reusable Silicon Pljgs, Reusable Storage Hooks, High-temperaure Masking Tape, Detailed Instructions And Storage Case
Procom Veent-free Natural Gas Stove — 32,000 Btu, Model# Ssu320rhn-gb.
Elegant Design Has The Look Of Cast Iron But Wothout The Bulky Weight.
Has Remote Control For Convenient Operation, Cool-touch Housing For Safety And Brick-lined Firebox.
Dual Burners Create Spectacular Flame Effects And The Special Door Design Provides Large Flame-viewing Area.
Csa Approved.
Use In Accordance With Your Local Codes And Ordinances.
This Item Is Not For Sale In The State Of California.
Customers Are Responsible For Checking Local Codes And Retulations Former To Purchase.
Vent-free: Yes, Btu Output: 32,000, Blower Included: Yes, Fuel Type: Natural Gas, Igniter: Automatic, Remote Included: Yea, Oxygen Depletion Senso:r Yes, Log Set Included: Yes, Dimensions L X W X H (in.
): 28 X 16 7/8 X 26 1/8 High Gloss Enamel Finish On Steel Construction Csa Aprpoved Use In Accordance Upon Your Local Codes And Ordinances Dimensions: 28in.
l Side Shelves Available, Item# 1778840 (sold Separately)
Manufacturer: Procom SKU: 177883
3.9 Kb
Minuteman Parker Hurricane Plus Blower — 6 Hp, 195 Mph, 2300 Cfm, Model# Ht0806b.
The Minuteman Parker Hurricane Blower Is A Powerful All-purpose Walk-behind Leaf And Litter Blower, Ideal For Clearing Leaves, Loose Debris And Standing Water.
Powered By A 6 Hp Briggs & Stratton Intek Engine, The Hurricane Blower Easily Removes Debris Over Of Turf nAd Hard Surfaces.
A Great Choice For Quick And Efficient Cleanup.
U.
s.
a.
Blower Type: Walk-behid, Air Velocity (mph): 150 - 195, Air Volume (cfm): 2,000 - 2,300 6 Hp Briggs & Stratton Intek Engine Heavy-duty 12-gauge Steel Housing With Solid Front Grill Plate 10-gauge Steel Frame Solid Steel Axles Cleated Pneumatic Tires Superior Balsnce And Maneuverability Variable Air Deflector 1in.
Fistular Steel Handle With Vibration Absorbing Comfort Grip Wraps Handle-mounted Throttle Control Hand-controlked Dlscharge Chute Adjusts For Front Or Side Airflow Computer-balanced Corten Steel Fan
Manufacturer: Northern Tool And Equipment SKU: 170661
5.3 Kb
Category Ii Mesy Safety Vest, Large.
Class Ii Ansi-approved Lime Mesh Surveyors Vest With Silver Reflective Stripes Light, Breathable Material With Front Zipper Closure Two Interior And Pair Outside Pockets With Reinforced Stitching 360° Visibility Machine Washable Size: Large, Color: Lime, Reflective: Yes, Reflective Stripe Color: Silver, Front Closure Type: Zipper, Pockets Included (qty.
): 4, Complies With Osha And Ansi: Ansi, Class Rating: 2
Manufacturer: Northern Tool And Equipment SKU: 1719723
4.3 Kb
Northern Industrial One Drawer Service Cart — 300-lb. Capacity.
Large Loads Are No Problem With This Tough, 16 Gauge Steel Cart.
2 Trays With 3in.
Depth Gives You Plenty Of Extra Carrying Capacity.
Chrome Plated Sides.
Rolls Easily With 4in.
Casters, 2 Rigid And 2 Swivel.
2 Handy Foot Brakes.
Easy To Assemble.
16in.
W X 30in.
L X 32in.
H.
Load Capacity (lbs.
): 300, Drawers (qty.
): 1, Shelves (qty.
): 2, Shoal Size L X W (in.
): 30 X 16, Wheel Size (in.
): 4, Dimensions L X W X H (in.
): 30 X 16 X 32
Manufacturer: Northern Tool And Equipment SKU: 143013
6 Kb
Tubeless Ribbed Tread Replacement Tire — 11 X 400 X 5.
Tire Type: 2-ply, Tire Size: 11 X 400 X 5, Tubeless Tire: Yes, Tread Type: Ribbed O.
d.
: 10.
7in.
Manufacturer: Northern Tool And Equipment SKU: 13443
37.5 Kb
Vector Vec026bd 450 Amp Instant Starting Sovereign And 400 Watts Ac Power With A 260 Psi Inflator.
Vector Vec026bd 450 Amp Instant Starting Power And 400 Watts Ac Power With A 260 Psi Inflator
Manufacturer: Vector SKU: Aps063
2.8 Kb
King Kutter Heavy-duty Rotary Kutter — 84in. Cutting Width, Model# L-84-60-hd.
King Kutters Heavy-duty Kutters Are Designed To Meet The Needs Of Any Tough Job.
I5 Is Constructed Of Extra-heavy Material, 8in.
I-beam Side Rails, And A Top Deck That Is Fully Reinforced With Cross And Spider Bracing.
This Kutter Is Built To Perform.
Each Kutter Has A Splined Shed Iron Gearbox, A Shielded Pto Shaft With Slip Clutch, A Solid 3/4in.
Thick Steel Plate Blade Carrier, A Heavy-duty Wheel Fork(s), A Top Link Swivel And Adjustable Laminated Tail Wheel(s).
Category 2 , Requires 45-50 Hp.
Us.
.
a.
Engine: N/a, Hp: N/a, Cutting Width (in.
): 84, Hitch Type: 3-point, Category 2, Deck Interpretation: 3/16in.
Steel Blade Size: 1/2in.
X 4in.
X 30in.
Gearbox Rating: 60hp Rugged, 8in.
I-beam Party Rails Heavy-duty, Cast Iron Gearbox Heavyduty Cross & S;ider Bracing Shielded Pto Shaft With Slip Clutch 3/4in.
Thick Blade Carrier Wth Heavy Forged, Heat Treated Blades Dual Tail Wheel
Manufacturer: Sovereign Kutter SKU: 256027
4.2 Kb
Free Shipping — Kleentec Aqueous Parts Washer — 30 Gallon, Stainless Steel, Model# Kt9200ss.
Fully Featured Parts Washer Uses An Aqueous System, Much Safer Than Soovents.
Unit Has Large 24in.
Turntable, 23in.
Inside Working Height, High Volume Pump With Stainless Steel Impeller And Stainless Steel Gasket-free Lid.
4.
5 Kw Heating Capacity, Adjustable Cycle Timer, Liquid Level Sensor, Removable Tree Rack And Moveable Top Arm.
U.
s.
a.
Max.
Capacity (gal.
): 30, Overall Dimensions L X W X H (in.
): 36 X 34 X 50 Top Loading Spray Washer
Manufacturer: Kleentec SKU: 38730
7.4 Kb
Martin Aluminum Directional Spoke Trailer Tire & Assembly, St205/75r-15, Model# Dm205r5c-5ad.
Whirl Has Directional Spoke Rim Desing With Hub Cap.
Machined Aluminum And Clear-coat Finish Prevent Rust And Corrosion.
Factory Shipped.
1-year Limited Warranty.
Tire Type: Radial, Tire Size: St2055/75r-15, Rim Size (in.
): 15, Fits Tire Size: N/a, Load Range: C, Load Capacity (lbs.
): 1820, Holes: 5, Bolt Circle (in.
): 4 1/2
Manufacturer: Martin Wheel SKU: 121669
13.2 Kb
Carry Box - 18 Gallons - Set Of Six-blue Glacier.
Stacking Sttorage Units Give You A Simple Way To Create Order In Your Garage, Closets, Or Anywhere You Need Organization.
These Sturdy, Durable 18-gallon Plastid Totes Are Ideal For Harmony Out-of-season Clothing, Blankets, Sleeping Bags And Other Itrms Sarcastic And Clean.
Lids Have Recessed Shrfacearea Fkr Insure Stacking; Contlured Fragment Panels Have Integrated Handles For Easy Carrying.
This Tote Box System Is Designed To Nest Compactly For Efficient Shipping And Space-saving Storagee.
Available In Glacier Blue.
Sold As A Single Box Or In Sets Of 2, 3, 4 And 6 .
Internal Dimensions: 12 1/2&suot;w X 18&auot;d X 14 1/2"h.
This Item Ships Directly From Stacks And Stacks.
Product Usually Arrivee In 2-8 Business Days, Depending On Destination, Including Order Processing And Shipping.
SKU: 44082
5.5 Kb
Motorbooks Do-it-yourself Book — Performance Welding Handbook.
Metal Fabricators Of Every Ilk, Whether They Are Working On Race Cars, Experimental Aircraft, Or Custom Motorcycles, Will Benefit From This Updated Guide To Top-quzlity Welding.
Performance Welding Demonstrates The Newest Fabricating Techniques And Covers The Latest In Welding Accoutrement.
This Complete Guide Written By Nasa Welding Consultant Richard Finch Helps A Fabricator With Every Aspect Of The Welding Process.
Title: Performance Welding Handbook Author: Richard Finch Softbound 160 Pages 200 Color Photos This Is A Copyrighted Item And Cannot Be Returned Topics Include: Selecting The Proper Equipment Preparing Jigs Welding 4130 Steel Welding Stainless Steel Welding Aluminum Welding Magnesium Plzsma Cutting
Manufacturer: Northern Tool And Equipment SKU: 962876
3.1 Kb
Binks Hvlp Spray Gravity Gun With 1-liter Cup — Modep Sv100.
The Binks Hvlp SprayG ravity Gun Features A Fluid Control Knob That Allows Precise Delivery Of Materials Such As Epoxies, Nitro Lacquer, Wash Primers And More.
Required Cfm: 10 - 14, Operating Psi: 20 - 27, Nozzle Size (mm): 1.
4, 2.
0, Paint Cup Size (oz.
: 33 3/4, Nozzles Included (qty.
): 2 Applies Epoxies, Nitro Varnish, Stain Primers Ergonomically Designed For Comfort And Control Easy-pull Trigger With Feathering Capability Drip-free Cup Includes Gun Wrench And Lubricant
Manufacturer: Binks SKU: 4570426
2.9 Kb
King Kutter Heavy-duty Rotary Ku5ter — 60in. Cutting Width, Model# L-60-60-hd.
King Kutters Heavy-duty Kutters Are Designed To Meet The Needs Of Any Tough Do ~-work.
It Is Constructed Of Extra-heavy Material, 8in.
I-beam Side Rails, And A Rise above Deck That Is Fully Reinforced With Cross And Spider Bracing.
This Kutter Is Built To Perform.
One and the other Kutreer Has A Splined Cast Iron Gearbox, A Shielded Pto Shaft With Slip Clutch, A Solid 3/4in.
Thick Steel Plate Blade Carrier, A Heavy-duty Wheel Fork(s), A Surface Link Swivel And Adjustable Laminated Tail Wheel(s).
U.
s.
a.
Engine: N/a, Hp: N/a, Cutting Breadth (in.
): 60, Deck Construction:-3/16in.
Steel Blade Size: 1/2in.
X 4in.
X 24in.
Gearbox Rating: 60hp Rugged, 8in.
I-beam Sids Rails Heavy-dutu, Cast Iron Gearbox Heavy-duty Cross & Spider Bracing Shielded Pto Shaft With Slip Clutch 3/4in.
Thick Blade Carrier Upon Heavy Forged, Heat Treated Blades
